Debian 4 (Etch) on Dell PowerEdge 2400 dual Cpu
Debian 4 (Etch) i686 Setup on Dell rack server PowerEdge 2400
Server Technical Specification
Microprocessor type
Dual Intel Pentium III 1000 Mhz 512-KB L2 cache Model SL4BS external operating frequency of 133 Mhz
Math coprocessor internal to microprocessor
Expansion Bus
Bus type PCI, ISA bus, operating at 33-MHz
Expansion slots five full-length 64-bit PCI;
one shared, full-length 32-bit PCI or 8- or 16-bit ISA. PCI6 can be used for optional DRAC 2 card.
Memory
DIMM sockets
four 168-pin sockets
2 GB 133-Mhz (4X512MB) DIMM
External cache none
Drives
Diskette drive
3.5-inch, 1.44-MB diskette drive included with standard system
Tape drive
40 GB
SCSI hard-disk drives
4 X QUANTUM ATLAS 10K IV Ultra320 SCSI 36.4GB 10000 rpm
SCSI devices integrated Adaptec AIC-7890 Ultra2/LVD SCSI host adapter supporting four 1.6-inch SCSI hard-disk drives or six 1-inch SCSI hard-disk drives in internal bays
integrated Adaptec AIC-7880 Ultra/Wide SCSI host adapter supporting up to three SCSI devices in externally accessible front bays, implemented as Ultra/Narrow. An internal SCSI backplane provides a physical connection, hot-plug capability, termination, and automatic configuration for the internal SCSI hard-disk drives.
CD-ROM drive SCSI CD-ROM drive Plextor
Ports
Externally accessible:
Serial
two 9-pin connectors
Parallel (bidirectional)
25-pin connector
USB
two
RJ45
RJ45 connector for connection to internal embedded NIC (Intel 82559 10/100 Ethernet controller)
Video
15-pin connector
PS/2-style keyboard
6-pin mini-DIN
PS/2-compatible mouse
6-pin mini-DIN
Internally accessible:
Ultra2/LVD SCSI controller
68-pin connector for internal SCSI drives
Ultra/Narrow SCSI controller
50-pin connector for internal CD-ROM or optional tape backup units
Diskette drive
34-pin connector for internal 3.5-inch diskette drive
XSMB_SMB connector
8-pin header connector
Embedded 10/100 Ethernet controller
connected to external RJ45 connector
Embedded PowerEdge
RAID controller
Intel i960RM on system board. Provides PCI-to-PCI bridge. Two integrated SCSI channels reside on the secondary PCI bus. Optional software and unbuffered, 64-MB SDRAM DIMM available. Supports RAID 0, 1, 5, and 10.
Video
Video type
ATI RAGE IIC PCI video controller; VGA connector
Video memory (standard) 4 MB SDRAM
Power
AC power supply:
Wattage
330 W
Voltage 115 V at 60 Hz/230 V at 50 Hz
System battery CR2032 3-V lithium coin cell
Physical
Rack Mount (6U):
Height
26 cm (10.25 inches)
Width
43.2 cm (17 inches)
Depth
58.4 cm (23 inches)
Tower Chassis:
Height
43.9 cm (17.3 inches)
Width
26.1 cm (10.3 inches)
Depth
59.2 cm (23.3 inches)
Environmental
Temperature:
Operating
10 to 35C (50 to 95F)
Storage
-40 to 65C (-40 to 149F)
Relative humidity:
Operating
8% to 80% (noncondensing) with a humidity gradation of 10% per hour
Storage
5% to 95% (noncondensing)
Maximum vibration:
Operating
0.25 G (half-sine wave) at a sweep of 3 to 200 Hz for 15 minutes
Storage
0.5 G at 3 to 200 Hz for 15 minutes
Maximum shock:
Operating
six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 50 G for up to 2 ms
Storage
six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 92 G for 2 ms
Altitude:
Operating
-16 to 3048 m (-50 to 10,000 ft)
Storage
-16 to 10,600 m (-50 to 35,000 ft)